High Flow Needle Sets Market Size
| Study Period | 2019 - 2029 |
| Base Year For Estimation | 2023 |
| CAGR | 6.60 % |
| Fastest Growing Market | Asia Pacific |
| Largest Market | North America |
| Market Concentration | Low |
Major Players
*Disclaimer: Major Players sorted in no particular order |
High Flow Needle Sets Market Analysis
The global high flow needle sets market is expected to grow at a CAGR of 6.6% over the forecast period. Rising prevalence of diabetes owing to growing number of baby boomers is a key factor for market growth. High flow needles are used when there is a need of administering more viscous drugs into the body. According to the International Diabetes Federation, approximately 463 million adults were living with diabetes in 2019 and this number is expected to reach 700 million in 2045 which will further bolster the overall growth.
In addition, new product launches by major companies across the globe to introduce technology with maximum safety and precision is expected to contribute to the market expansion. For instance, RMS medical products received FDA 510(k) clearance for high-flo super26 subcutaneous needle sets which allows subcutaneous infusion of medications in the home, hospital, or ambulatory settings to facilitate high flow rates. Factors such as the safe delivery and efficacy of subcutaneous therapies, promote compliance, and prompt use design were favorable with the majority of health care personnel preferring high flow needle technology as compared to conventional needles.
Certain treatment regimens are associated with pain and anxiety where various psychological and physical factors trigger the pain receptors of the brain. For instance, there is a close association of pain and anxiety with dental injection during dental procedures. These factors boost the high flow needles set market over forecast period. However, low adaptation of the high flow needle sets in under developing regions may restrict the market.
High Flow Needle Sets Market Trends
This section covers the major market trends shaping the High Flow Needle Sets Market according to our research experts:
The Hospital Segment Dominates the Market and is Expected to Continue the Same during the Forecast Period
Hospitals accounted for the largest share in the end-use segment in 2019, which can be attributed to the high patient turnaround volume and frequent readmissions. Supportive infrastructure facilitates successful surgical procedures, which mandates the adoption of high flow needle set, thus, resulting in the higher share of hospitals. In addition, financial burden on hospitals is increasing. Hence, hospitals prefer partnering with diagnostic centers for regular health checkup. This aids in cost saving among small and mid-sized hospitals.
Diagnostic centers are also anticipated to showcase the significant growth over the forecast period owing to the rising number of people being diagnosed with various chronic disorders. In addition, regular health checkups without the doctors' intervention is also a high impact-rendering driver for the segmental growth.
The North America Dominates the Market and is Expected to Continue the Same during the Forecast Period
North America is leading owing to the presence of major market players. Several collaborative efforts undertaken by major companies to enhance their R&D capabilities and ensure high medical standards are anticipated to govern the market across this region. The increase in the prevalence of various chronic disorders among both the pediatric and elderly population is one of the factors indicating the growing number of patients being admitted thereby boosting the demand for use of high flow needle sets. The awareness regarding the presently available, technologically advanced needle sets gaining prominence, and lack of low-cost skilled professionals are some of the crucial factors expected to boost the market.
The Asia-Pacific is expected to witness the fastest growth over the forecast period. High economic development in countries such as India, China, Indonesia and others is a key factor boosting the expenditure on healthcare infrastructure and medical services. This region is emerging as key medical tourism destination, and the government and private sector are investing significant resources to reach the service quality standards adopted in the western regions. Moreover, increasing patient pool suffering with chronic diseases is also boosting the demand for high flow needle in the region.
High Flow Needle Sets Industry Overview
The global market is highly competitive in nature. Research institutes and medical device manufacturers are focusing on introducing high flow needles with enhanced drug delivery. Investment for the development of high flow needle set with lesser adverse effects and improving geographic penetration through partnerships and collaborations are the key strategies adopted by the companies to increase their market share.
The major players include companies such AmDel, B. Braun Medical Inc., Concordance Healthcare Solutions, GEORGE PHILIPS MEDICAL ENGINEERING Pvt. Ltd, KORU Medical Systems, Medline Industries, Inc., Norfolk Medical, Smiths Group plc., Thermo Fisher Scientific.
High Flow Needle Sets Market Leaders
-
B. Braun Medical Inc
-
KORU Medical Systems
-
Medline Industries, Inc
-
Smiths Group plc
-
Thermo Fisher Scientific
*Disclaimer: Major Players sorted in no particular order
High Flow Needle Sets Market Report - Table of Contents
-
1. INTRODUCTION
-
1.1 Study Assumptions
-
1.2 Scope of the Study
-
-
2. RESEARCH METHODOLOGY
-
3. EXECUTIVE SUMMARY
-
4. MARKET DYNAMICS
-
4.1 Market Overview
-
4.2 Market Drivers
-
4.2.1 Increasing Prevalence of Chronic Diseases
-
4.2.2 Introduction of the Novel Drug Delivery System
-
4.2.3 Extensive R&D to Introduce Needle Technology with Mazimum Safety
-
-
4.3 Market Restraints
-
4.3.1 Low Adaptation of the High Flow Needle Sets
-
-
4.4 Porter's Five Force Analysis
-
4.4.1 Threat of New Entrants
-
4.4.2 Bargaining Power of Buyers/Consumers
-
4.4.3 Bargaining Power of Suppliers
-
4.4.4 Threat of Substitute Products
-
4.4.5 Intensity of Competitive Rivalry
-
-
-
5. MARKET SEGMENTATION
-
5.1 By Volume Capacity
-
5.1.1 Less than 10ml
-
5.1.2 10-100ml
-
5.1.3 More than 100ml
-
-
5.2 By Raw Material
-
5.2.1 Stainless Steel
-
5.2.2 Polycarbonate
-
-
5.3 By End Use
-
5.3.1 Hospitals
-
5.3.2 Ambulatory Surgical Centers
-
5.3.3 Diagnostic Center
-
5.3.4 Others
-
-
5.4 Geography
-
5.4.1 North America
-
5.4.1.1 United States
-
5.4.1.2 Canada
-
5.4.1.3 Mexico
-
-
5.4.2 Europe
-
5.4.2.1 Germany
-
5.4.2.2 United Kingdom
-
5.4.2.3 France
-
5.4.2.4 Italy
-
5.4.2.5 Spain
-
5.4.2.6 Rest of Europe
-
-
5.4.3 Asia-Pacific
-
5.4.3.1 China
-
5.4.3.2 Japan
-
5.4.3.3 India
-
5.4.3.4 Australia
-
5.4.3.5 South Korea
-
5.4.3.6 Rest of Asia-Pacific
-
-
5.4.4 Middle-East and Africa
-
5.4.4.1 GCC
-
5.4.4.2 South Africa
-
5.4.4.3 Rest of Middle-East and Africa
-
-
5.4.5 South America
-
5.4.5.1 Brazil
-
5.4.5.2 Argentina
-
5.4.5.3 Rest of South America
-
-
-
-
6. COMPETITIVE LANDSCAPE
-
6.1 Company Profiles
-
6.1.1 AmDel
-
6.1.2 B. Braun Medical Inc.
-
6.1.3 Concordance Healthcare Solutions
-
6.1.4 GEORGE PHILIPS MEDICAL ENGINEERING Pvt. Ltd
-
6.1.5 KORU Medical Systems
-
6.1.6 Medline Industries, Inc.
-
6.1.7 Norfolk Medical
-
6.1.8 Smiths Group plc.
-
6.1.9 Thermo Fisher Scientific
-
- *List Not Exhaustive
-
-
7. MARKET OPPORTUNITIES AND FUTURE TRENDS
High Flow Needle Sets Industry Segmentation
High flow needle sets are designed to ensure the safety and comfort of users. The high flow needles are used when there is more viscous drugs needs to administer into the body. It enables faster flow and smother insertion of drugs by reducing the pain and gives more comfort as compared to traditional needles. The high flow needle sets market is segmented by volume capacity, raw material, end use and geography.
| By Volume Capacity | |
| Less than 10ml | |
| 10-100ml | |
| More than 100ml |
| By Raw Material | |
| Stainless Steel | |
| Polycarbonate |
| By End Use | |
| Hospitals | |
| Ambulatory Surgical Centers | |
| Diagnostic Center | |
| Others |
| Geography | ||||||||
| ||||||||
| ||||||||
| ||||||||
| ||||||||
|
High Flow Needle Sets Market Research FAQs
What is the current High Flow Needle Sets Market size?
The High Flow Needle Sets Market is projected to register a CAGR of 6.60% during the forecast period (2024-2029)
Who are the key players in High Flow Needle Sets Market?
B. Braun Medical Inc, KORU Medical Systems , Medline Industries, Inc, Smiths Group plc and Thermo Fisher Scientific are the major companies operating in the High Flow Needle Sets Market.
Which is the fastest growing region in High Flow Needle Sets Market?
Asia Pacific is estimated to grow at the highest CAGR over the forecast period (2024-2029).
Which region has the biggest share in High Flow Needle Sets Market?
In 2024, the North America accounts for the largest market share in High Flow Needle Sets Market.
What years does this High Flow Needle Sets Market cover?
The report covers the High Flow Needle Sets Market historical market size for years: 2019, 2020, 2021, 2022 and 2023. The report also forecasts the High Flow Needle Sets Market size for years: 2024, 2025, 2026, 2027, 2028 and 2029.
High Flow Needle Sets Industry Report
Statistics for the 2024 High Flow Needle Sets market share, size and revenue growth rate, created by Mordor Intelligenceā¢ Industry Reports. High Flow Needle Sets analysis includes a market forecast outlook to 2029 and historical overview. Get a sample of this industry analysis as a free report PDF download.
High Flow Needle Sets Report Snapshots
