Aircraft Engine Testbed Market Size
| Study Period | 2019 - 2029 |
| Base Year For Estimation | 2023 |
| CAGR | > 1.50 % |
| Fastest Growing Market | Asia-Pacific |
| Largest Market | North America |
| Market Concentration | High |
Major Players
*Disclaimer: Major Players sorted in no particular order |
Aircraft Engine Testbed Market Analysis
The aircraft engine testbed market is projected to grow with a CAGR of over 1.50% during the forecast period.
The global aircraft engine testbed market witnessed reduced growth due to the COVID-19 pandemic. The aviation sector saw unprecedented challenges amid the pandemic. Travel restrictions reduced air travelers, and decreased aircraft orders have severely impacted the aviation industry. However, with the market showcasing a strong recovery post-covid with an increased number of air passengers and the projected increase in passengers to pre-pandemic levels, the aircraft engine testbed market is expected to witness a significant growth rate during the pandemic.
Demand for new aircraft increased due to rising air traffic, modernization of aging aircraft, and growing investment in aircraft maintenance, repair, and overhaul, driving the market growth. Aircraft engine testbeds test engine performance and collect necessary data from the tests. Testbeds and testing engines in the sky Engines need to be certified as safe and fit. The primary engine manufacturers used flying testbeds (FTBs) to check engine performance. These FTBs can validate engine performance at 40,000 to 50,000 feet above the ground, which helps in improving safety.
In addition, the rapid expansion of the aviation sector, growing air traffic, and rising aircraft orders create demand for aircraft engine testbeds. Furthermore, various governing bodies tighten the safety norms due to increased accidents and mishaps occurring around aircraft, which drives the market growth.
Aircraft Engine Testbed Market Trends
This section covers the major market trends shaping the Aircraft Engine Testbed Market according to our research experts:
Fixed-Wing Segment is Anticipated to Hold Largest Market Share During the Forecast Period
The fixed-wing segment will showcase significant growth during the forecast period. The increase is attributed to rising air travelers, growing investment in constructing new airports, and MRO services. Furthermore, increasing deliveries of business jets, fighter jets, and general aviation aircraft will drive the market's growth. For instance, GTRE and Safran will jointly develop a 110kN powerplant for India's 5th generation AMCA program. Safran has proposed to use Dassault-owned Rafale as a flying test bed. Thus, rising investment in developing flying testbeds and the upgradation of aging aircraft fleets will drive the market's growth.
For instance, in February 2022, Airbus entered into a partnership with CFM International (a joint company of GE and Safran Aircraft Engines) to develop an A380 flying testbed called the ZEROe Demonstrator to examine how hydrogen combustion can be used to power turbofan jet engines. Furthermore, rising procurement of military aircraft will create demand for engine testbeds, driving the market growth. In July 2022, the United States Department of Defense (DoD) signed a three-year contract with Lockheed Martin Corporation to manufacture 375 F-35 fighter jets.
Asia Pacific may Showcase Highest Growth During the Forecast Period
Asia-Pacific is anticipated to grow with the highest CAGR during the forecast period. Rapid urbanization, growing air traffic, and rising demand for new aircraft drive regional market growth. An increase in air travelers and growing expenditure on the aviation sector from emerging economies such as China and India boost market growth. COMAC, a Chinese aircraft manufacturer, forecasts China will become the world's largest aviation market by 2040. Furthermore, the country's aircraft fleet will reach 9,957 by 2040, accounting for 22 percent of the global passenger aircraft fleet.
Furthermore, according to the International Air Transport Association (IATA) report, India will surpass the United Kingdom and become the third-largest aviation market by 2024. Increasing expenditure on the aviation industry and developing new airports lead to increased demand for new aircraft. Furthermore, in 2020, the Indian government plans to build 100 new airports to improve regional connectivity by 2024.
Additionally, the Indian government has a strong focus on strengthening military capabilities. China and India were the second and third largest defense spenders, respectively in 2021. Thus, growing spending on military aircraft procurement from India and China drives the market's growth across the region.
Aircraft Engine Testbed Industry Overview
The aircraft engine testbed market is consolidated and characterized by a few players who provide engine testbed facilities. Some prominent aircraft survival equipment market players are Safran SA, Rolls-Royce PLC, Raytheon Technologies Corporation, CFM International, Froude, Inc., Nidec Industrial Solutions, Honeywell International Inc., and others. Technological advancements and the introduction of new technologies in engine testbeds will likely drive market growth.
Aircraft Engine Testbed Market Leaders
-
Safran
-
Rolls-Royce plc
-
Raytheon Technologies Corporation
-
CFM International
*Disclaimer: Major Players sorted in no particular order
Aircraft Engine Testbed Market News
November 2022: Rolls-Royce entered the final phase of testing its Advanced Low Emissions Combustion System (ALECSys) demonstrator engine. The demonstrator took to the skies attached to the Rolls-Royce Boeing 747 Flying Test Bed in the United States.
May 2021: Rolls-Royce plc opened the largest engine testing facility in the world, Testbed 80 in the United Kingdom. Rolls-Royce entered into a partnership with MDS Aero, a Canadian company, to design and build, which covers 7,500 square meters with the latest instrumentation and digital networking technologies. The cost of the facility was worth USD 130 million.;
Aircraft Engine Testbed Market Report - Table of Contents
1. INTRODUCTION
1.1 Study Assumptions
1.2 Scope of the Study
2. RESEARCH METHODOLOGY
3. EXECUTIVE SUMMARY
4. MARKET DYNAMICS
4.1 Market Overview
4.2 Market Drivers
4.3 Market Restraints
4.4 Porters 5 Force Analysis
4.4.1 Threat of New Entrants
4.4.2 Bargaining Power of Buyers/Consumers
4.4.3 Bargaining Power of Suppliers
4.4.4 Threat of Substitute Products
4.4.5 Intensity of Competitive Rivalry
5. MARKET SEGMENTATION
5.1 By Engine Type
5.1.1 Piston Engine
5.1.2 Turboprop
5.1.3 Turbofan Jet Engine
5.2 By Aircraft Type
5.2.1 Fixed-Wing
5.2.2 Rotary-Wing
5.3 By Geography
5.3.1 North America
5.3.1.1 United States
5.3.1.2 Canada
5.3.2 Europe
5.3.2.1 Germany
5.3.2.2 United Kingdom
5.3.2.3 France
5.3.2.4 Russia
5.3.2.5 Rest of Europe
5.3.3 Asia-Pacific
5.3.3.1 India
5.3.3.2 China
5.3.3.3 Japan
5.3.3.4 South Korea
5.3.3.5 Rest of Asia-Pacific
5.3.4 Latin America
5.3.4.1 Brazil
5.3.4.2 Rest of Latin America
5.3.5 Middle East and Africa
5.3.5.1 United Arab Emirates
5.3.5.2 Saudi Arabia
5.3.5.3 South Africa
5.3.5.4 Rest of Middle East and Africa
6. COMPETITIVE LANDSCAPE
6.1 Vendor Market Share
6.2 Company Profiles*
6.2.1 Safran SA
6.2.2 Raytheon Technologies Corporation
6.2.3 Honeywell International Inc.
6.2.4 Rolls-Royce PLC
6.2.5 CFM International
6.2.6 Froude Inc.
6.2.7 Nidec Industrial Solutions
6.2.8 General Electric
6.2.9 HAECO
7. MARKET OPPORTUNITIES AND FUTURE TRENDS
Aircraft Engine Testbed Industry Segmentation
An aircraft engine testbed is used to develop, characterize, and test engines. It is used to monitor and validate engine performance in different operating regimes and offers measurement of several physical variables associated with the engine operation.
The aircraft engine testbed is segmented based on engine type, aircraft type, and geography. By engine type, the market is segmented into Piston Engines, Turboprop, and Turbofan Jet Engines. The market is also segmented by aircraft type. The market is segmented into Aircraft Type by Fixed-Wing and Rotary-Wing aircraft. The market sizing and forecasts have been provided in value (USD million) for all the above segments across various regions.
| By Engine Type | |
| Piston Engine | |
| Turboprop | |
| Turbofan Jet Engine |
| By Aircraft Type | |
| Fixed-Wing | |
| Rotary-Wing |
| By Geography | |||||||
| |||||||
| |||||||
| |||||||
| |||||||
|
Aircraft Engine Testbed Market Research FAQs
What is the current Global Aircraft Engine Testbed Market size?
The Global Aircraft Engine Testbed Market is projected to register a CAGR of greater than 1.5% during the forecast period (2024-2029)
Who are the key players in Global Aircraft Engine Testbed Market?
Safran, Rolls-Royce plc, Raytheon Technologies Corporation and CFM International are the major companies operating in the Global Aircraft Engine Testbed Market.
Which is the fastest growing region in Global Aircraft Engine Testbed Market?
Asia-Pacific is estimated to grow at the highest CAGR over the forecast period (2024-2029).
Which region has the biggest share in Global Aircraft Engine Testbed Market?
In 2024, the North America accounts for the largest market share in Global Aircraft Engine Testbed Market.
What years does this Global Aircraft Engine Testbed Market cover?
The report covers the Global Aircraft Engine Testbed Market historical market size for years: 2019, 2020, 2021, 2022 and 2023. The report also forecasts the Global Aircraft Engine Testbed Market size for years: 2024, 2025, 2026, 2027, 2028 and 2029.
Aircraft Engine Testbed Industry Report
Statistics for the 2024 Aircraft Engine Testbed market share, size and revenue growth rate, created by Mordor Intelligence™ Industry Reports. Aircraft Engine Testbed analysis includes a market forecast outlook 2029 and historical overview. Get a sample of this industry analysis as a free report PDF download.
Aircraft Engine Testbed Market Report Snapshots
